Filter
Top Products
6
Installation instructions
Checking for transport damage
After removing the packaging, make sure the product is complete and undamaged and that all
accessories are present. Do not use the appliance if it is visibly damaged. Contact Customer
Care.
Installing and connecting the appliance
Important!
Installation must be performed by a qualified professional in compliance with legislation in force
in the country of installation (see Built-in installation).
This appliance should be connected to a circuit which incorporates an isolation switch providing
full disconnection from the power supply.
The packing elements (plastic bags, polystyrene foam, etc.) should be kept out of reach of
children.
Do not install the appliance in rooms where the temperature may drop to 0°C or lower.
Customise the water hardness as soon as possible following the instructions in section ‘Changing
and setting menu parameters’, under “Setting water hardness”.
Check that the mains power supply voltage corresponds to the value indicated on the rating plate
on the bottom of the appliance.
Connect the appliance to an efficiently earthed and correctly installed socket with a minimum
current rating of 10A only.
If the power socket does not match the plug on the appliance, have the socket replaced with a
suitable type by a qualified professional.
To comply with safety directives, an omnipolar switch with a minimum contact distance of 3 mm
must be installed.
Do not use multiple sockets or extensions.
Safety cutout devices must be included in the mains power supply in compliance with the
installation regulations in the country concerned.
Disposal
Electrical appliances must not be disposed of as household waste.
Appliances with this symbol are covered by European Directive 2002/96/EC.
All unused electric and electronic appliances must be disposed of separately from household
waste by taking them to state authorised special centres. Disposing of the unused appliance
correctly avoids damage to the environment and a risk to health. For more information on
disposing of the unused appliance, contact the local administration, the waste disposal
department or the shop where the appliance was bought.
Technical specification
Voltage: 220-240 V~ 50/60 Hz max. 10A Absorbed power: 1350 W
Pressure: 15 bars Water tank capacity: 1.8 litres
Size LxHxD: 594x460x412 mm Weight: 24 kg
EN