Filter
Top Products
Factory Default Settings
All programs and parameters can be returned to
factory default settings (except user-imported Sound
Images).
To reset: Hold down both UP and Feedback Cancel
switches for over 2 seconds while plugging in 9V
power.
A prompt will appear in the LED Display when
the Aura has reset.
Factory Defaults:
Play mode, default to program 01
Programs 01 through 04 correspond to Sound Images P1 to P4 (Select parameter)
Programs 05 through 16 correspond to Sound Images 01 to 12 (Select parameter)
Note: Any Sound Images imported by the user into the Aura will remain there when the unit is reset to
factory defaults. Original factory Sound Images are available at www.fishmanaura.com.
Programs 17 through 50: oF no Sound Image selected for these programs,
pickup appears in the Aura channel.
Aura EQ Bass, Mid & Treble: 0 (flat)
Blend: 6 (75% Sound Image)
Pickup EQ - Bass, Mid & Treble: 0 (flat)
Phase (Pickup): 0 (positive polarity)
Compressor: oF (off)
Level: 0 (no boost or cut)
Tuner: calibrated to 40 (A= 440 Hz ), mute engaged
Appendix D
33
Aura
™
Acoustic Imaging Blender