Frymaster 47 Series Fryer User Manual


 
4-1
47 SERIES GAS FRYERS
CHAPTER 4: FILTRATION INSTRUCTIONS
4.1 Draining and Manual Filtering
WARNING
The on-site supervisor is responsible for ensuring that operators are made aware of
the inherent hazards of operating a hot oil filtering system, particularly the aspects
of oil filtration, draining and cleaning procedures.
DANGER
Draining and filtering of cooking oil or shortening must be accomplished with care to
avoid the possibility of a serious burn caused by careless handling. The oil to be
filtered is at or near 350°F (177°C). Ensure all hoses are connected properly and
drain handles are in their proper position before operating any switches or valves.
Wear all appropriate safety equipment when draining and filtering cooking oil or
shortening.
DANGER
NEVER attempt to drain cooking oil or shortening from the fryer with the burner lit!
Doing so will result in a flash fire if the oil or shortening splashes onto the burner.
Also, applying burner heat to an empty frypot will severely damage the frypot and
void the Frymaster warranty.
DANGER
Allow oil/shortening to cool to 100ºF (38ºC) or lower before draining to an
appropriate container for disposal.
If your fryer is not equipped with the built-in FootPrint III Filtration System, the cooking oil or
shortening must be drained into another suitable container. For safe, convenient draining and
disposal of used cooking oil or shortening, Frymaster recommends the use of the Frymaster
Shortening Disposal Unit (SDU). The SDU is available through your local distributor.
DANGER
When draining oil/shortening into a disposal unit or portable filter unit, do not fill
above the maximum fill line located on the container.
1. Turn the fryer power switch to the OFF position. Screw the drainpipe (provided with your fryer)
into the drain valve. Make sure the drainpipe is firmly screwed into the drain valve and that the
opening is pointing down.
2. Position a metal container with a sealable cover under the drainpipe. The metal container must
be able to withstand the heat of the cooking oil/shortening and hold hot liquids. If you intend to
reuse the oil or shortening, Frymaster recommends that a Frymaster filter cone holder and filter
cone be used when a filter machine is not available. If you are using a Frymaster filter cone
holder, be sure that the cone holder rests securely on the metal container.