1-21
1.11.4 MIB (Manual Interface Board) Display Diagnostics
DISPLAY LED EXPLANATION
Drain
Vat # (The vat number is followed by
an “L” to indicate left side of a split
vat or an “r” to indicate the right side
of a split vat or a full vat.)
On Drain valve on vat # is open
Vat # (The vat number is followed by
an “L” to indicate left side of a split
vat or an “r” to indicate the right side
of a split vat or a full vat.)
Off Drain valve on vat # is closed
Vat # (The vat number is followed by
an “L” to indicate left side of a split
vat or an “r” to indicate the right side
of a split vat or a full vat.)
Blink Drain valve on vat # is opening or closing or an
error condition may exist.
Return
Vat # (The vat number is followed by
an “L” to indicate left side of a split
vat or an “r” to indicate the right side
of a split vat or a full vat.)
On Return valve on vat # is open
Vat # (The vat number is followed by
an “L” to indicate left side of a split
vat or an “r” to indicate the right side
of a split vat or a full vat.)
Off Return valve on vat # is closed
Vat # (The vat number is followed by
an “L” to indicate left side of a split
vat or an “r” to indicate the right side
of a split vat or a full vat.)
Blink Return valve on vat # is opening or closing or an
error condition may exist
Network
N Network error, displays for 10 seconds if no
communications are received from the M3000
within 10 seconds after power on or MIB reset.
Resetting
r An “r” is displayed for ten seconds or until
communication is received from the M3000 after a
power on or MIB reset.
Miscellaneous
E alternating with vat # (The vat
number is followed by an “L” to
indicate left side of a split vat or an
“r” to indicate the right side of a split
vat or a full vat.)
Blink The circuit has an issue. Ensure the actuator is
plugged in. Ensure the CAN connections are all
securely plugged into the connectors.
Indicates the AIF temperature sensor did not detect
a full vat during filtration.
A Manual LED off The system is in auto filtration mode.
Vat # (The vat number is followed by
an “L” to indicate left side of a split
vat or an “r” to indicate the right side
of a split vat or a full vat.)
Manual LED on The system is in manual mode.
P This will only be displayed in auto filtration mode.
Filter pan is improperly seated. Any auto filtration
messages received at this time are ignored.