Filter
Top Products
1-37
1.14.6 M3000 Filter Error Flowchart
Change filter pad and
ensure filter pan is
pulled out for a
minimum of 30
seconds.
Fryer returns to
cook mode for 4
minutes or 15
minutes if pad
change expired.
NORMAL
OPERATION
RESUMES
SIXTH
CONSECUTIVE
FILTER ERROR
Fryer returns to
cook mode for 15
minutes.
TECH
ENTERS
CODE
MESSAGE
DISPLAYED
Call an Authorized
Repair Technician
If the computer displays SERVICE
REQUIRED, the fryer can be used in
most cases by answering NO when the
prompt for SYSTEM ERROR
FIXED? YES NO is displayed. The
message repeats every 15 minutes until
the issue is repaired and error cleared by
a technician. To clear the error, enter
1111 after answering YES when
SYSTEM ERROR FIXED? YES
NO is displayed.
This chart follows the process of clearing a filtration
issue. The prompt is displayed when any of the
following occur:
1. a clogged filter pad,
2. a tripped or defective filter pump,
3. a leaky O-ring on the pick-up tube,
4. a failed drain valve/actuator, or
5. a failed return valve/actuator.