Filter
Top Products
3-4
3.1.3 Shutdown
For short-term shut down during the workday:
1. Place the computer ON/OFF switch in the OFF position and put the frypot covers in place.
When shutting the fryers down at closing time:
1. Place the computer ON/OFF switch in the OFF position to turn the fryer off.
For Non-CE Fryers
After placing the ON/OFF switch in the OFF
position, turn the gas valve knob to the OFF
position.
Honeywell
ON
OFF
Honeywell
ON
OFF
For CE Fryers
Placing the ON/OFF switch in the OFF
position also turns off the gas valve.
2. Filter the oil and clean the fryers (See Chapters 4 and 5).
3. Place the frypot covers on the frypots.
3.2 Boiling Out the Frypot
To ensure that the frypot is free of any contamination resulting from its manufacture, shipping, and
handling during installation, the frypot must be boiled out before first use. Refer to Drain and Clean
Frypot (page 5-2) for this procedure.
3.3 Operation
This fryer is equipped with M2000 computers (illustrated below). Refer to the separate M2000 Com-
puter Operating Instructions furnished with the fryer for the computer programming and operating
procedures.
M2000 COMPUTER