Filter
Top Products
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
About light bulb replacement.
46
Cooktop Light/Night Light
To replace combination cooktop light/night light,
first disconnect the power at the main fuse or circuit
breaker panel or pull the plug.
Remove the screw on the right side of the light
compartment cover and lower the cover until it stops.
Be sure the bulb(s) to be replaced are cool
before removing. Break the adhesive seal by
gently unscrewing the bulb(s).
Replace with 40-watt incandescent bulbs. Order WB02X4253
from your GE supplier. High-intensity 40-watt bulbs (40S11N/1),
available in supermarkets and hardware stores, may also be
used for replacements.
Raise light compartment cover and replace the
screw. Connect electrical power to the oven.
4
3
2
1
Remove screw
Oven Light
To replace the oven light, first disconnect the power
at the main fuse or circuit breaker panel or pull the plug.
Remove the top grille by taking out the screw that
holds it in place.
Next, remove the single screw located above the
door near the center of the oven that secures the
light housing.
Replace the burned-out bulb with a 40-watt incandescent bulb
(WB02X4253), available from your GE supplier.
3
2
1