Filter
Top Products
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
About the exhaust feature.
48
To Remove Charcoal Filter
To remove the charcoal filter, first disconnect power at
the main fuse or circuit breaker panel or pull the plug.
Remove the top grille by removing the 2 screws that
hold it in place. Slide the filter towards the front of the
oven and remove it.
The charcoal filter cannot be cleaned. It must be replaced. Order
Part No. WB02X4267 from your GE supplier.
If the model is not vented to the outside, the air will be
recirculated through a disposable charcoal filter that
helps remove smoke and odors.
The charcoal filter should be replaced when it is
noticeably dirty or discolored (usually after 6 to
12 months, depending on hood usage).
Charcoal Filter (on some models)
To Install Charcoal Filter
To install a new filter, remove plastic and other outer
wrapping from the new filter.
Insert the filter into the top opening of the oven as
shown. It will rest at an angle on 2 side support tabs
and in front of the right rear tab. Replace the grille
and 2 screws.
Remove 2 grille screws to remove
the grille.