Filter
Top Products
:OPERation[:EVENt]? STATus:OPERation[:EVENt]? queries the status of the Standard
Operation Status Event Register.
Comments • Output Format: Returns a decimal weighted value from 0 to 256
indicating which bits are set true.
• Related Commands: [ROUTe:]SCAN
Example Reading the Operation Status Event Register after a Scanning Cycle
STAT:OPER? Returns the bit values of the
Standard Operation Status Event
Register. Returns +256 if bit 8 is
set to 1; +0 if bit 8 is set to 0.
64 HP E1368A/69A/70A Command Reference Chapter 4