Filter
Top Products
View Recipe
When the mixer is in RECIPE mode, you can view the step settings of any recipe.
1. Press the SELECT/SAVE button.
A. Display will alternate between speed and time.
B. The LED of the step being displayed will flash.
2. Use the arrow buttons to view the next step.
3. Use the Recipe selector to view other recipes.
4. Press PGM button to return to the RECIPE mode.
NOTE: If the mixer is performing a recipe, the recipe will continue to operate in normal
recipe mode sequence.
PROGRAMMING RECIPE TIMER
Fig. 16
HL200 is powered with display showing a mix time (Standard Mode) or recipe number (Recipe Mode).
1. If a mix time is displayed, Press RECIPE mode button. Display corresponds with position of recipe
(speed) selector.
2. Press and hold TIME. Continue holding TIME, then press PGM and hold until rP1 is displayed (with
step 1 blinking), buzzer sounds and programmed step LEDs are lit.
3. Use arrows to select recipe number (1-4) for programming.
4. Press SELECT/SAVE to enter program mode for the recipe number selected.
Buzzer sounds and display alternates between speed and time to indicate programming mode.
12
HL200 Mixer Technical Manual Page 18 of 111