Filter
Top Products
3
Installation, Operation and Care of
Legacy
TM
12 & 20-Quart Mixers
SAVE THESE INSTRUCTIONS
GENERAL
The Legacy 12-quart mixer is a bench-type mixer which features a SmartTimer™, a manual bowl
lift and a #12 attachment hub as standard equipment.
The Legacy 20-quart mixer is a bench-type mixer which features a SmartTimer™, a manual bowl
lift and a #12 attachment hub as standard equipment. With the use of special agitators, a 12
quart bowl may be used on the HL200 mixer.
A variety of attachments, agitators and accessories are available. These are described in a
separate Use and Applications Handbook, which is furnished on the Legacy Mixer Operator
Training CD provided with each mixer.
INSTALLATION
UNPACKING
Immediately after unpacking the mixer, check for possible shipping damage. If this machine is
found to be damaged after unpacking, save the packaging material and contact the carrier within
15 days of delivery.
LOCATION
Prior to installation, test the electrical service to assure that it agrees with the specifications
on the machine data plate.
Place the mixer on a suitable sturdy level surface. There should be adequate space around the
mixer for the user to operate the controls and to install and remove bowls.
Holes are located in the base to permanently secure the mixer, although this is not necessary
in normal installations.
HL200 Mixer Technical Manual Page 9 of 111