Filter
Top Products
18
MEAT CHOPPER ATTACHMENT
The Meat Chopper Attachment allows you to prepare many additional foods
with your Hobart mixer. A plate having
1
/
8
" holes comes with the Meat Chopper
Attachment when shipped from the factory. Other plates are available with hole
sizes
5
/
64
,
3
/
16
,
1
/
4
,
3
/
8
,
1
/
2
,
5
/
8
and
11
/
16
" for fi ne to coarse chopping. The results are the
same as produced by Hobart commercial meat choppers. Operate Meat Chopper
Attachments in slower speeds.
The feed pan should be kept in place in the cylinder for ease of feeding. Cut meat
into strips and feed it into the chopper using the feed stomper only as needed.
Substances that could become packed tight in the chopper like bread crumbs
are not recommended. If material in the cylinder stalls the mixer, push the
STOP button at once. DO NOT attempt to restart at a slower speed. Remove
the adjusting ring, knife, plate and worm and clear the obstruction.
Always keep the drain hole on both the Attachment Hub and Meat Chopper
clean, clear and free of obstruction.
MEAT CHOPPER ATTACHMENT
HL200 Mixer Technical Manual Page 44 of 111