Filter
Top Products
19
INGREDIENT CHUTE
The Ingredient Chute can be attached to the Wire Cage on the Bowl Guard.
The Ingredient Chute allows ingredients to be added to the bowl while the mixer
is mixing.
BOWL SCRAPER ATTACHMENT
The mixer Bowl Scraper Attachment is available to scrape the sides of the bowl
as the agitator rotates to re-introduce material into the mixture.
INGREDIENT CHUTE BOWL SCRAPER ATTACHMENT
SPLASH COVER AND BOWL EXTENSION RING
Splash Covers and Bowl Extension Rings provide a means for reducing splashing
for certain mixes at higher speeds. Splash covers fi t under the Bowl Guard. The
stainless steel Bowl Extension Ring is also available.
Splash Covers and Bowl Extensions, while convenient accessories, should not
be used to increase the mixing capacity beyond the recommended maximum.
The best functioning of Hobart mixers requires room at the top of the bowl for
aeration and manipulation. Follow the Hobart Mixer Capacity Chart of the best
quality of mix.
Splash Covers on larger mixers have a smaller diameter opening at the top
due to their inverted cone shape. Overloading the mixer while a splash cover
is in use reduces aeration because of restriction in the area where air enters
the batch.
SPLASH COVER BOWL EXTENSION RING
HL200 Mixer Technical Manual Page 45 of 111