Filter
Top Products
15 185211000
Area in front, sides and back of Unit must be kept free of obstructions which would prevent air flow in and out of
the Unit. A minimum of 12-inches all-around clearance (12-inch clearance to nearest obstruction) is required.
The Unit condenser coil should be periodically cleaned as instructed in the SERVICE AND MAINTENANCE
section to maintain cooling efficiency of the Unit.
CHECKING ICE WATER BATH
A ‘‘gurgle’’ heard from the Unit indicates water level in the water tank is low and more water should be added
for maximum product cooling as instructed in the SERVICE AND MAINTENANCE section.
CLEANING CO
2
GAS CHECK VALVES
(see Figure 2 and 5)
The CO
2
gas check valves must be inspected and serviced at least once a year under normal conditions and
after any CO
2
system servicing or disruption as instructed in the SERVICE AND MAINTENANCE section.