Filter
Top Products
15
2 Preparing and using your IMPRESSA for the first time
If the machine is operated with a defective power cable, there is a
danger of electric shock.
Never use a machine which has a defective power cable.
Precondition: the water tank must be full.
Remove the protective film from the symbol display.
Insert the mains plug into a power socket.
e l Switch on the IMPRESSA using the power switch on the back
of the machine.
The On/Off symbol
G will light up to indicate that the
machine is on standby.
m l Press the Rotary Switch to switch the IMPRESSA on.
The light segment by the switch will now flash.
Place a receptacle under the Easy Cappuccino Frother.
r l Turn the switch in the anticlockwise direction.
The light segment by the switch will now light up. The system
will now be filled with water. A small amount of water will
flow out of the Easy Cappuccino Frother.
The operation stops automatically. The light segment by the
switch will now flash.
t l Turn the switch in the clockwise direction.
As long as the machine is heating up, the Maintenance
symbol
h will flash. The Maintenance symbol h lights up.
Place a receptacle under the coffee spout.
l
l
l
l
l
First-time use First-time use
WARNINGWARNING