Filter
Top Products
34
5 Preparing drinks at the touch of a button
Open the filler funnel for pre-ground coffee.
Place one level measuring spoon of pre-ground coffee in the
filler funnel.
ä l Turn the Rotary Switch to the 1 coffee setting d.
m l Press the Rotary Switch to initiate preparation of the coffee.
The symbols for pre-ground coffee
j and 1 coffee d will
flash, and the pre-configured amount of water will flow into
the cup.
Drink preparation stops automatically.
To prepare two cups of pre-ground coffee, place two cups under the
coffee spout, add two level measuring spoons of pre-ground coffee
to the filler funnel, turn the Rotary Switch to the symbol for 2
coffees
f and then press to initiate preparation of the coffee.
Precondition: your IMPRESSA is ready to use, the Easy Cappuccino
Frother is mounted.
Take the milk pipe out of the Welcome Pack.
Take the protective cap off the Easy Cappuccino Frother.
Attach the milk pipe to the frother.
Insert the other end in a milk Tetrapack or connect it to a
milk container.
Place a cup under the Easy Cappuccino Frother.
ä l Turn the Rotary Switch so that it points to the Steam
symbol
k.
m l Press the Rotary Switch to confirm your choice.
The Steam symbol
k will continue flashing until the
IMPRESSA has warmed up. As soon as the required temper-
ature has been reached, the light segment by the switch will
flash.
l
l
l
l
l
l
l
Milk foam Milk foam