Filter
Top Products
17
2 Preparing and using your IMPRESSA for the first time
Precondition: your IMPRESSA must be switched off (standby
mode).
Open the access door.
n l Hold down the Filter button until the Filter indicator n
lights up.
ä l Turn the Rotary Switch until the 3 light segments around the
Rotary Switch light up.
When the 3 light segments light up, the filter is activated. If
none of the light segments light up, this means that the filter
has not been activated.
m l Press the Rotary Switch to confirm the setting.
The light segment by the switch will now flash.
Place a receptacle (containing at least 500 ml) under the
Easy Cappuccino Frother.
If the milk pipe is connected, remove it.
r l Turn the switch in the anticlockwise direction.
Rinsing of the filter will now begin. The light segment by the
switch will light up.
The water could be slightly discoloured. This is not harmful to health,
nor does it affect the taste.
Rinsing of the filter will automatically stop after approx.
500 ml, and the light segment by the switch will then flash.
t l Turn the switch in the clockwise direction.
The IMPRESSA will switch itself off (into standby mode). The
filter is now activated.
l
o
l
l