Filter
Top Products
47
8 Maintenance
Immerse the milk pipe in the receptacle.
ä l Turn the Rotary Switch so that it points to the Steam
symbol
k .
m l Press the Rotary Switch to confirm the action.
The Steam symbol
k will continue flashing until the
IMPRESSA has warmed up.
As soon as the required temperature has been reached, the
light segment by the switch will flash.
r l Turn the switch in the anticlockwise direction.
The frother and pipe will be cleaned.
t l
Turn the switch in the clockwise direction as soon as the con-
tainer holding the Auto-Cappuccino Cleaner is empty.
The light segment by the switch will now flash.
Fill the receptacle with 250 ml of fresh water and immerse
the milk pipe in it.
Perform the next step as soon as the light segment by the
switch is flashing. This means that the IMPRESSA has reached
the temperature necessary for steam. If the light segment is
no longer flashing, turn the Rotary Switch once again to the
Steam symbol
k and press the Rotary Switch. As soon as the
required temperature has been reached, the light segment by
the switch will flash again.
r l Turn the switch in the anticlockwise direction.
The frother and pipe are rinsed with fresh water.
t l Turn the switch in the clockwise direction as soon as the con-
tainer holding the water is empty.
Cleaning of the Easy Cappuccino Frother is now complete
and your IMPRESSA is ready to use again.
l
l
o