Filter
Top Products
41
8 Maintenance
Lift the cartridge holder.
Take out the old CLARIS plus filter cartridge.
Insert the new CLARIS plus filter cartridge into the water
tank, pressing it lightly.
Close the cartridge holder.
It will lock into place audibly.
Fill the water tank with cold, fresh mains water and
reinsert.
Place a receptacle (containing at least 500 ml) under the
Easy Cappuccino Frother.
If the milk pipe is connected, remove it.
n l Hold down the Filter button until the Filter indicator n
flashes.
The light segment by the switch will now flash.
r l Turn the switch in the anticlockwise direction.
Rinsing of the filter will now begin. The light segment by the
switch will now light up.
The water could be slightly discoloured. This is not harmful to health,
nor does it affect the taste.
Rinsing of the filter will automatically stop after approx.
500 ml, and the light segment by the switch will then flash.
t l Turn the switch in the clockwise direction.
The Maintenance symbol
h flashes, the IMPRESSA heats up
and is once again ready for use.
You can initiate the “Changing the filter” operation manually. Start
when the first prompt appears
l, as described under “Replacement
following a prompt”.
After dispensing 200 cups of coffee or performing 80 switch-on
rinses, the IMPRESSA will prompt you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
Use only original JURA care products.
l
l
l
l
l
l
l
l
Manual filter changeManual filter change
Cleaning the machine Cleaning the machine
CAUTIONCAUTION