Filter
Top Products
19
2 Preparing and using your IMPRESSA for the first time
Example: to change the water hardness from level 3 to level 4,
proceed as follows:
Precondition: your IMPRESSA must be switched off (standby
mode).
Open the access door.
b l Hold down the Descaling button until the Descaling indi-
cator
b lights up.
The Descaling indicator
b and the symbols A S D will
now light up.
ä l
Turn the Rotary Switch until the four symbols a s d f
light up.
m l Press the Rotary Switch to confirm the level 4 setting.
The IMPRESSA will switch itself off (into standby mode). The
water hardness is now set.
You can adjust the grinder to suit the roast of your coffee.
If you adjust the fineness of grind when the grinder is not operating,
the fineness of grind switch could be damaged.
Only adjust the fineness of grind when the grinder is running.
Our recommendations:
Select a fine setting for a light roast.
Select a coarse setting for a darker roast.
Example: to change the fineness of grinding during preparation of
a coffee, proceed as follows:
Open the cover of the bean container and remove the aroma
preservation cover.
Place a cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 coffee setting D.
l
l
p
p
l
l
Adjusting grinder Adjusting grinder
CAUTIONCAUTION