Filter
Top Products
16
2 Preparing and using your IMPRESSA for the first time
m l Press the Rotary Switch.
The machine will rinse itself, stopping automatically.
The 1 Espresso symbol
a will light up indicating that your
IMPRESSA is ready to use.
After the first time that a coffee speciality has been prepared,
you may find that the maintenance indicator and the bean
container
c display flash if the grinder has not yet been filled
with coffee beans. In that case, prepare a different coffee
speciality.
Your IMPRESSA no longer has to be descaled if you are using CLARIS
plus filter cartridges.
Perform the “Using filter” operation without a break. This will
ensure that your IMPRESSA always produces its best.
You can also try out the “Using filter” operation online. Visit
the Knowledge Builder on www.jura.com.
Further information on CLARIS can be found in Chapter 9, “CLARIS
plus filter cartridge – Water for perfect coffee”.
Remove the packaging on the CLARIS plus filter cartridge.
Remove the water tank and empty it.
Lift the cartridge holder and insert the filter cartridge into
the water tank, applying a light pressure.
Close the cartridge holder. It will lock into place audibly.
Fill the water tank with cold, fresh mains water and rein-
sert.
After two months, the filter will cease to work. Monitor the
elapsed time as shown on the date plate on the cartridge
holder.
o
o
@
l
l
l
l
l
o
Using and activating
filter
Using and activating
filter