Filter
Top Products
37
7 Adjusting the permanent settings in programming mode
By instructing your IMPRESSA to switch itself off, you can cut down
your energy consumption.
The permanent setting for programmable switch-off time is
4 hours.
The number of symbols illuminated indicates the programmable
switch-off time that has been activated in hours:
Example: to amend the programmable switch-off time from 4 hours
to 2, you should proceed as follows:
Precondition: your IMPRESSA must be switched off (standby
mode).
Open the access door.
v l Hold down the Cleaning button until the Cleaning indicator
v lights up.
The IMPRESSA is in programming mode, the Cleaning indi-
cator
v and the symbols a s d are illuminated.
o
l
7 Adjusting the permanent settings in programming mode7 Adjusting the permanent settings in programming mode
Programmable
switch-off time
Programmable
switch-off time
Switch-off time Shown in symbol display Meaning
Not active No symbol is illuminated Switch-off time not
programmed
1 hour 1 symbol is illuminated
a
Switch-off after 1 hour
2 hours 2 symbols are illuminated
a s
Switch-off after 2 hours
4 hours 3 symbols are illuminated
a s d
Switch-off after 4 hours
8 hours 4 symbols are illuminated
a s d f
Switch-off after 8 hours
Switch-off time Shown in symbol display Meaning
Not active No symbol is illuminated Switch-off time not
programmed
1 hour 1 symbol is illuminated
a
Switch-off after 1 hour
2 hours 2 symbols are illuminated
a s
Switch-off after 2 hours
4 hours 3 symbols are illuminated
a s d
Switch-off after 4 hours
8 hours 4 symbols are illuminated
a s d f
Switch-off after 8 hours