Jura Capresso IMPRESSA C5 Coffeemaker User Manual


 
23
3 Familiarising yourself with the control options
m l Press the Rotary Switch to initiate preparation of the coffee.
The grinder starts up, the 1 coffee symbol
d flashes, and one
light segment above the Rotary Switch is illuminated.
ä l
While the grinder is running, turn the Rotary Switch in a
clockwise direction until three light segments have lit up.
The grinding operation stops, brewing begins and the pre-
defined quantity of water flows into the cup.
Drink preparation stops automatically.
It is easy to adjust the amount of water for all coffee specialities to
the cup size for good. As in the following example, adjust the amount
of water once. Every time you prepare a drink in the future, this
amount of water will be dispensed.
Permanent adjustment of cup size works the same way for all coffee
specialities.
Example: to permanently adjust the amount of water for an
Espresso, you should proceed as follows:
Place an Espresso cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 Espresso setting a.
m l Keep the Rotary Switch pressed down until the light seg-
ment flashes above the Rotary Switch.
Coffee preparation will start and the Espresso will flow into
the cup.
m l Press the Rotary Switch again when enough Espresso has
flown into the cup.
Espresso preparation will now stop. Your IMPRESSA will
remember the amount of water you have specified for an
Espresso for good.
You can alter these settings at any time by repeating the
above procedure.
l
o
Adjusting the perma-
nent cup size settings
Adjusting the perma-
nent cup size settings