Filter
Top Products
72
14 Transport and environmentally neutral disposal
To protect the IMPRESSA from damage caused by frost during trans-
portation, the system needs to be emptied.
Precondition: the IMPRESSA is ready for use.
l Place a receptacle under the frother.
ä l Turn the Rotary Switch so that it points to the Steam
symbol
k.
m l Press the Rotary Switch to confirm your choice.
The Steam symbol
k will continue flashing until the ma-
chine has warmed up. As soon as the required temperature
has been reached, the light segment by the switch will
flash.
r l Turn the switch in the anticlockwise direction.
Steam will now come out of the frother.
l Remove the water tank and empty it.
Steam will continue to flow out of the frother until the system
is empty. The light segment by the switch will now flash.
t l Turn the switch in the clockwise direction.
The Maintenance indicator and the Water Tank indicator
y
both flash. Please ignore these indicators.
m l Press the Rotary Switch to turn the machine off.
e l Turn your IMPRESSA off at the power switch.
The next time you use the machine, you will need to refill the
system (see Chapter 2, “Preparing and using your IMPRESSA
for the first time – first-time use”).
Keep the packaging for your IMPRESSA. It is used to protect the
machine during transportation.
Please dispose of old machines in an environmentally neutral way.
Old machines contain valuable materials capable of being recycled
which should be salvaged for recycling. Please therefore dispose of
old machines via suitable collection systems.
o
o
14 Transport and environmentally neutral disposal14 Transport and environmentally neutral disposal
Empty systemEmpty system
TransportTransport
DisposalDisposal