Kenmore 87561 Convection Oven User Manual


 
RECALL AND CHANGE OF SETTINGS
To Recall a Setting
To recall (check) a setting before you start the oven, follow the directions below.
® To check the Setting for a given stage, touch MEMORY/RECALL once or more until the correct
Stage Light and Indicator Light turn on. The set Time, Temperature or Oven Temperature for that
stage will show in the display window.
To check the Microwave Cooking Power level, touch MICRO POWER.
® To check the Oven Temperature, touch OVEN TEMP/PREHEAT.
To recall (check) a setting while the oven is operating, follow the directions below.
® To check settings while the oven is operating, touch the desired pad to recall the setting for the
operating stage.
o To recall a future stage, touch STOP, follow the directions above for recalling (checking) a setting
before starting the oven, and then touch START to continue cooking.
e To recall TIME OF DAY while the oven is running, touch TIME OF DAY. It will show momentarily
in the display window.
To Change a Setting
Recall the Setting to be changed by following directions above and make the change as follows:
TIME ................................................................ Touch "0"until only one "0" shows in
(MICRO TIME, CONVEC TIME, MICRO/CONVEC TIME) the Display Window. Set Cooking
Time.
TEMPERATURE CONTROL ...................................... Set Cooking Probe Temperature.
(MICRO TEMP, CONVEC TEMP, MICRO/CONVEC TEMP)
MICRO POWER .................................................... Set Microwave Cooking Power Level°
To reset to "HI", set "99".
OVEN TEMP/PREHEAT ........................................... Set Oven Temperature.
PAUSE BETWEEN STAGES
Some recipes require placing or removing of ceramic tray, stirring, turning and adding or removing of foods
between stages. To set the oven to stop between stages, touch PAUSE rather than MEMORY/RECALL
when setting the oven. If pause is set, the oven will automatically stop.
After the pause, to restart the oven, touch START.
REGULAR TIMER
Your Oven also has a timer that can be used for non-cooking functions. When used as a regular timer, the
Oven is not running. The timer is simply counting down in seconds.
For detailed insturctions on using this timer, see below.
To use the Ragular Timer feature:
I. Touch CLEAR.
2. Touch MICRO TIME.
3. Touch numbers for the time.
4. Touch MICRO POWER.
5. Touch "0" (power level 0)
6. Touch START. The time will begin counting down in the display window with no cooking or heating in
the oven.
A tone will sound and the word "End" will show in the display window for 2 seconds when the time is
over.
13