Filter
Top Products
J!
MULTI-STAGE COOKING
Multi-Stage cooking allows you to set the oven to cook in one stage at a certain power level for a chosen time or
temperature and then in a second stage at a different power level for a chosen time or temperature. The cooking process
can be set for three memory stages when Programmed Defrost is included as the first stage. The stages are set before
cooking and will sequence automatically when oven is started.
I.
2.
.
o
.
.
.
8.
.
Touch CLEAR.
Touch MICRO TIME or MICRO TEMP. The lights
above TIME or TEMP and MICRO, below COOK I
will go on. The display window will show "0" or "F'.
Touch the correct numbers for the time or temp-
erature of the first cooking stage.
Touch MICRO POWER. The lights above MICRO
and below COOK I will go on. The display window
will show "HI".
Touch the correct numbers for the cooking power
level of the first cooking stage (if other than "HI").
Touch MEMORY/RECALL or PAUSE. The light
below COOK 2 will go on. The display window will
show "0".
Touch MICRO TIME or MICRO TEMP.
Touch the correct numbers for the time or temp-
erature of the second cooking stage.
Touch MICRO POWER. The display window will
show "HI".
EXAMPLE: In preparing a cake mix, the cookbook calls
for a first stage of 7minutes at the "50 (SIMMER)" power
level followed by a second stage of 3 minutes at "HI". The
following steps explain how to set the oven:
First Stage (7 minutes: power level 50 SIMMER)
I. Touch CLEAR.
2. Touch MICRO TIME.
3. Set 7 minutes by touching "7,"
"0" and "0." "700" will show in
the display window.
_E]C_E_E_i
10.
Touch the correct numbers for the cooking power
level in the second cooking stage (if other than "HI").
11. Touch START.
MULTI-STAGE COOKING WITH
PROGRAMMED DEFROST
Ifyou want to cook after using the Programmed Defrost,
before setting the above multi-stage cooking, set the
Programmed Defrost and touch MEMORY/RECALL,
then follow the above instructions numbered 2_11. See
Pages 20 through 24 for the detailed instructions of
Programmed Defrost. The cooking process can be set up
to three stages when PROGRAMMED DEFROST is one
of the stages.
®To pause between stages
To set the oven to stop between stages, touch PAUSE
when setting the oven. See Page 13 for more detailed
directions.
4. Touch MICRO POWER.
"HI" will show in the display
window to remind you that the
oven will operate at highest
power unless you enter a lower
power setting.
.
.Touch numbers "5" and "0."
"50" will show in the display
window (indicating that you
have set the oven to operate at
power level 50).
The first stage has been set.
f-S-7_
C]E] G_2 [Z_E]
NOTE: If you touch MEMORY/RECALL instead of
PAUSE, the oven will not stop but will remember the
next stage and continue working.
25