Filter
Top Products
cleaning an
maintenance features
TO REMOVE
OVEN DOOR REMOVAL
Open oven door to first stop
position. Hold the door firmly at
sides, lift up and away from the
range To replace, slip hinge arms
into door slots_ and with hand or
knee push door in at bottom until it
cricks Then close door
TO REPLACE
(for those models with a }ight)
HOW TO USE THE OVEN LIGHT SWITCH
The oven light can be turned OFF by a control button
located on the right end of the control panei Press in to
turn fight on and off
REPLACING THE OVEN LIGHT (some models)
Do not touch the oven bulb when hoL with wet hands or
wipe oven light area with wet cloth Unscrew the bulb
and replace with a 40 watt, t30 volt appliance bulb An
appliance bulb is smaller than a standard 40 watt
household bulb The t30 volt bulb is made to withstand
high oven temperatures and gives you a much longer
bulb life A t20 volt bulb may be used but life
expectancy is much shorter
To change the bulb, on models having aglass lens held
in place with a spring wire to protect the oven bulb from
heat
= Swing the wire al! the way to the side and hold it so
glass _ens can be lifted off
= Unscrew bulb and replace with a 40 watt appliance
bulb
• Place glass lens over socket and swing wire back up
over tens
o The glass iens must be in place whenever the oven is
in use
@ @--©
STORAGE DRAWER (slide-ins)
This drawer gives you extra space for keeping
cookware and bakeware
Do not keep plastics and flammable materials in this
drawer
REMOVABLE OVEN RACKS
The oven racks can be removed for easy cleaning Pull
the rack out and up. in one motion to remove
Make sure your racks are inserted correctly The
straight racks should have the back bar curved up and
facing the rear of the oven The offset rack (666 Series)
has the offset facing up with the two wire tabs to the
rear
i
18