Filter
Top Products
module accessories
Optional Accessory
ROTIlSHISH NO. 49926
The rottlshish accessories are to be used with the steak
grill (No. 49924)_
Skewers <
(all models)
5. The spit handle is removable, if necessary, Leave
the handle in place for easier handling on the spit
and meal
6. Take apart and clean after each use when parts
are cool.
Caution: The end supports can become hot,
Step I
frill Frame
Motor Switch
Spit
Gear Bracket
Motor High Position
Low Position _
Front End Support_w P_osttion
TO INSTALL ROTISSERIE
1. Grasp the rear end support with two hands (See
Step 1)_The end support with five holes fits into
the rear grill frame and the end support with
skewer support positions fits into the fronL
2. Fit the tabs on the end supports into the opening
in the grill frame_ Slide forward, Push top of the
rear end supports back until bottom is level on the
grill frame (See Step 2),
3_ The motor fits on the back of the rear end support._
In the low position the motor is mounted vertically.
In the high position the mounting is horizontal°
4. The spit rests in a slot in the front end supporL
Push the end of the spit firmly into the motor
socket at the rear of the cooktop Both the spit
and motor must be placed in the same position,
either high or low (See Step 4),
Motor in
high position
2O