Filter
Top Products
8
Preparing the Food Processor for Use
Before First Use
Before using your Food Processor for
the first time, wash the work bowl,
work bowl cover, mini bowl, feed
tube pusher, discs, and blades either
by hand or in the dishwasher (see
“Cleaning the Food Processor” on
page 14).
Work Bowl Assembly
1. Place the Food Processor base on a
dry, level countertop with the
controls facing you. Do not plug
in the unit until it is completely
assembled.
2. With the handle just to the left of
centre, place the work bowl on
the base, and fit the centre
opening over the power shaft.
3. Grasp the work bowl handle and
turn the bowl to the right until it
locks into position.
4. Insert the desired blade or disc
into the work bowl. See next page
for instructions.
5. Place the work bowl cover on the
work bowl with the feed tube just
to the left of the work bowl
handle. Grasp the feed tube and
turn the cover to the right until it
locks into place.
NOTE: Do not attach the cover to the
work bowl before the work bowl is
locked on the base. Damage to the
work bowl may result.
6. Fit the food pusher into the
feed tube.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
Off
On
P
u
lse