Filter
Top Products
9
Preparing the Food Processor for Use
7. Plug the power cord into an
electrical outlet.
NOTE: Your Food Processor will not
operate unless the work bowl and
work bowl cover are properly locked
on the base.
Do not remove the work bowl from
the base without first removing the
work bowl cover. Damage to the
work bowl may result.
Multipurpose Blade Assembly
Place the blade on the power shaft.
Rotate the blade so it falls into place
on the shaft.
Reversible Slicing/Shredding
Disc Assembly
1. Grasp the disc with fingers away
from slicing and shredding blades.
Use care; blades are sharp.
2. Fit centre opening of the disc over
the disc stem. Turn the stem
counterclockwise to lock the disc
into place.
3. Place assembled disc and stem on
the power shaft. It may be
necessary to slightly rotate the disc
so that it aligns properly and falls
into place.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
Continued on next page