Filter
Top Products
5. Open the lid and place the cone
inside the strainer basket, over the
power shaft. It may be necessary to
rotate the cone until it falls into
place.
6. Halve the fruit to be juiced.
7. Place fruit half on the cone.
8. Close the lid of the strainer basket.
Hold the lever arm down firmly
with an open palm to maintain
even pressure. Operate the citrus
press only when the lever arm is in
the down position, holding the
fruit on the cone.
NOTE: Use of the citrus press
without the clip-on lever arm is not
recommended. If you do use it
without the lever arm, remove the
lever arm from the basket (see
Step 13).
9. Operate the citrus press by
pressing the On button or the
Pulse button.
10. When juice is fully extracted,
press the Off button.
NOTE: Do not exceed the maximum
liquid level line on the work bowl, or
juice will leak from the bowl.
11. Unlock the strainer basket by
turning it clockwise. Remove
juiced fruit, cone, and strainer
basket from the work bowl.
12. Remove the work bowl from Food
Processor and pour juice into
desired container.
13. To detach the clip-on lever arm
from the strainer basket for
cleaning, pull the clip at the
bottom of the basket away from
the basket side and remove the
lever arm from the basket.
14. When reattaching the lever arm
to the strainer basket, make sure
the tabs on the clip snap securely
into a pair of holes in the bottom
of the basket.
11
Preparing the Food Processor for Use