Filter
Top Products
2-2
GENERAL
REMOVING THE MICROWAVE OVEN & CABINET
WARNING
Personal Injury Hazard
Disconnect from the electrical supply be-
fore servicing the unit. Failure to do so
could result in death or electrical shock.
CAUTION: Because of the weight and size of
the microwave oven, two people are required
to safely move and install it. Failure to do so
could result in personal injury.
7. To remove the cabinet from the micro-
wave oven, remove the two inside screws
from the top of the cabinet that secure the
vent grille to the oven. Pull the top of the
vent grille out so the tabs are free of their
slots, and lift the bottom to unhook the
locking tabs from their slots.
8. Remove the screw from the power cord
cover and remove the cover.
9. Remove the remaining screws from the
top and rear of the cabinet.
10. Slide the cabinet back and unhook the
sides from the tabs, then slide the power
cord out of the cabinet, and remove the
cabinet.
Proceed to the section for the component you
wish to service.
5. Support the front of the microwave oven
and remove the two bolts and washers
from the top of the oven.
6. Using two people, remove the microwave
oven from its mounting location and set it
on a protected (padded) work surface.
LOCK PIN &
WASHER
1. Disconnect the electrical supply to the
microwave oven.
2. Remove the six screws from the base
plate and remove it.
3. Pull the connectors off the cooktop light
socket terminals and set the base plate
aside (see the illustration on the next
page).
4. Remove the lock pin and washer from the
top of the microwave oven.