Filter
Top Products
Page 2-13
2-13
Microwave Oven Hood Combo Service Manual — LIT 4317216
Original 03/97
REMOVING THE CAVITY THERMAL FUSE
1. Disconnect the electrical supply to the
microwave oven.
2. Remove the microwave oven from its
mounting location (refer to page 2-2 for
the procedure).
3. Remove the vent grille and the cabinet
from the microwave oven (refer to page 2-
2 for the procedure).
4. Unplug the wire connectors from the ter-
minals of the cavity thermal fuse, then
straighten the tabs, and remove the ther-
mal fuse.
5. Install the new cavity thermal fuse and
then reassemble the microwave oven.
WARNING
Personal Injury Hazard
Disconnect from the electrical supply be-
fore servicing the unit. Failure to do so
could result in death or electrical shock.
Discharge the high voltage capacitor be-
fore working inside the oven. Failure to do
so could result in death or electrical shock.
CAUTION: Because of the weight and size of
the microwave oven, two people are required
to safely move and install it. Failure to do so
could result in personal injury.
CAVITY
THERMAL
FUSE
TABS
THE CAVITY THERMAL
FUSE OPENS AT 230˚F
AND RESETS AT 140˚F