Filter
Top Products
2-6
WARNING
Personal Injury Hazard
Disconnect from the electrical supply be-
fore servicing the unit. Failure to do so
could result in death or electrical shock.
REMOVING THE CONTROL PANEL
1. Disconnect the electrical supply to the
microwave oven.
2. Remove the two screws from the top of
the cabinet for the vent grille and remove
the grille (see the illustration on page
2-3).
3. Remove the screw from the top center tab
of the control panel.
4. From the top and back of the control
panel,
lift the top locking tab and pull
the top of the panel out slightly, then lift
the bottom tabs of the panel out of the
slots and pull it forward. Turn the panel
over out of the way.
1
TURN PANEL OVER
TOP
LOCKING
TAB
CONTROL
PANEL
BOTTOM
TABS
BOTTOM
SLOTS
TAB
SLOT
MOUNTING
SCREW
TOP CENTER
TAB
SLOT
TAB