Filter
Top Products
Page 2-11
2-11
Microwave Oven Hood Combo Service Manual — LIT 4317216
Original 03/97
REMOVING THE BASE THERMAL FUSE
WARNING
Personal Injury Hazard
Disconnect from the electrical supply be-
fore servicing the unit. Failure to do so
could result in death or electrical shock.
2. Remove the two screws from the top of
the cabinet for the vent grille and remove
the grille (see the illustration on page 2-3).
3. Remove the control panel from the micro-
wave oven (see page 2-6 for the proce-
dure).
4. Remove the mounting screw from the base
thermal fuse and remove it.
5. Unplug the wire connectors from the base
thermal fuse terminals.
6. Install the new base thermal fuse and
then reassemble the microwave oven.
CONTROL
PANEL
BROWN & WHITE
WIRES
TAB
BASE
THERMAL
FUSE
SLOT
MOUNTING
SCREW
YELLOW
WIRE
THE BASE THERMAL FUSE
CLOSES @133˚F & RESETS @ 104˚F.
1. Disconnect the electrical supply to the
microwave oven.