Filter
Top Products
Page 2-21
2-21
Microwave Oven Hood Combo Service Manual — LIT 4317216
Original 03/97
REMOVING THE BLOWER MOTOR CAPACITOR
2. Remove the microwave oven from its
mounting location (refer to page 2-2 for
the procedure).
3. Remove the vent grille and the cabinet
from the microwave oven (refer to page
2-2 for the procedure).
4. Disconnect the two wire connectors from
the blower motor capacitor terminals.
5. Unsnap the locking arms from over the
defective blower motor capacitor and re-
move it.
6. Install the new blower motor capacitor
and then reassemble the microwave oven.
BLOWER
MOTOR
CAPACITOR
RED
WIRE
YELLOW
WIRE
LOCKING
ARMS
WARNING
Personal Injury Hazard
Disconnect from the electrical supply be-
fore servicing the unit. Failure to do so
could result in death or electrical shock.
CAUTION: Because of the weight and size of
the microwave oven, two people are required
to safely move and install it. Failure to do so
could result in personal injury.
1. Disconnect the electrical supply to the
microwave oven.