Filter
Top Products
2-4
THE PROTECTION CONTROL SYSTEM
REMOVING THE OVEN DOOR
WARNING
Personal Injury Hazard
Disconnect from the electrical supply be-
fore servicing the unit. Failure to do so
could result in death or electrical shock.
CAUTION: Because of the weight and size of
the microwave oven, two people are required
to safely move and install it. Failure to do so
could result in personal injury.
1. Disconnect the electrical supply to the
microwave oven.
2. Remove the vent grille and the base plate
from the microwave oven (see the illus-
tration on page 2-3).
3. Remove the six oven door hinge screws
and remove the door.
4. Install the new oven door and then reas-
semble the microwave oven.
REASSEMBLY NOTE: Make sure that you
open and close the door several times to make
sure that it operates properly before you reas-
semble the oven.
HINGE
MOUNTING
SCREWS
HINGE
MOUNTING
SCREWS