Filter
Top Products
DESCRIPTION
OI c5 eng V9 / 18.08.2006 1 - 5 © Cafina / Melitta
E
1.2.15 Key cards
Key cards are needed to access the func-
tions of the c5 coffee maker.
Functions such as switch on/switch off,
counter readout or programming can only
be used if one has the relevant authorised
key card.
1.2.15.1 "user" key card
The "user" key card is the card of the per-
son who operates the c5 coffee maker.
This card can be configured as a multi-user
card for up to six c5 coffee makers.
1.2.15.2 "manager" key card
The "manager" key card is the card of the
person (manager), who uses this card to
gain access to the higher-level functions.
This card can be configured as a multi-user
card for up to six c5 coffee makers.
1.2.15.3 "memory" key card
The "memory" key card contains all the
system data for the c5 coffee maker, as it
was configured at the time of (first) installa-
tion by the service technician.
The "memory" key card enables the coffee
maker to be reset following an emergency.
1.2.15.4 "free vend" key card
The "free vend" key card enables beverag-
es to be dispensed at no charge, using ex-
ternal billing modules.
1.2.15.5 "vip" key card
The "vip" key card enables the self-service
mode to be enabled or disabled without
having to delve into the programming of the
c5 coffee maker.
1.2.15.6 "external" key card
The "external" key card enables external
modules, such as coin-operation units or
coin-checking devices, to be enabled or
disabled without having to delve into the
programming of the c5 coffee maker.
1.2.15.7 "key lock" key card
The "key lock" key card enables the control
buttons to be locked or released without
having to delve into the programming of the
c5 coffee maker.
1.2.15.8 "engineer" key card
The "engineer" key card is reserved for the
service technician. It allows the technician
to access every area of the system soft-
ware, read the statistical data and directly
control hardware components for test pur-
poses.