Filter
Top Products
OPERATION
OI c5 eng V9 / 18.08.2006 5 - 17 © Cafina / Melitta
E
5.4.5 Drawing steam
The steam is used to heat up cold and pre-
heated drinks.
The steam tap [ ] can be rotated up to
90° max.
Operational status of steam tap:
- Steam tap closed [ ]
- Steam tap open to the maximum
possible [ ]
1. Rotate hot water outlet to the vertical
position.
2. Rotate steam tap [ ] slightly down-
wards so as to allow the condensed
water that is still in the steam outlet to
run off into the drip tray.
Keep the steam tap [ ] rotated until
only steam comes out of the nozzle.
3. Rotate the steam tap [ ] until it is
right back in position.
4. Rotate the steam outlet forwards and
dip it into the drink that is to be heated.
With larger receptacles, moved the
steam outlet together with the recepta-
cles towards the c5 coffee maker and
then place the receptacle on the drip
grille.
5. Rotate steam tap [ ] downwards in
a controlled way and keep it in this po-
sition until the drink has reached the
desired temperature.
If necessary, move the receptacle up-
wards and sideways during the heating
operation.
6. Once the heating operation has fin-
ished, rotate the steam tap [ ] right
back into its normal position.
7. Pull receptacle forwards and put aside.
8. Wipe steam outlet clean with a moist
cloth.
9. Rotate hot water outlet to the vertical
position.
10. Rotate steam tap [ ] slightly down-
wards so as to allow the residual fluid
that is still in the steam outlet to run off
into the drip tray.
CAUTION
• Steam outlet is hot.
• Danger of burns and scald-
ing.
• Be careful when touching
the hot steam outlet.