SAFETY INSTRUCTIONS
© Cafina / Melitta 2 - 6 OI c5 eng V9 / 18.08.2006
E
2.2.2.4 Key cards
2.2.3 Personal safety
CAUTION
• Keep key cards dry, cool
and in the plastic pockets
provided for this purpose.
There is a risk of damage.
• Never put a key card on a
hot surface or expose to di-
rect sunlight. There is a risk
of damage.
• Never put a key card down
in an environment where
there is a risk of water
splash. There is a risk of
damage.
• Always clean key cards in-
cluding chip contacts with a
clean, slightly moist cloth
without using any house-
hold cleaner. There is a risk
of damage.
• Never bend or fold a key
card or use it as a tool.
There is a risk of damage.
• In an environment that is
likely to be electrostatic, al-
ways ensure that you have
earthed yourself (e.g. by
touching a radiator) before
handling a key card. There
is a risk of damage.
WARNING
If handled improperly, the equip-
ment could cause serious or fa-
tal injury.
Anyone using and maintaining
the equipment must be trained
in the correct handling of the
equipment and must have read
and understood the safety in-
structions in these Operating In-
structions before starting to use
or maintain the equipment.
WARNING
Never modify or remove any
safety mechanisms.
Do not disable any safety mech-
anisms by modifying the equip-
ment.
If there are any warning symbols
affixed to the equipment (depen-
dent on nationality), never re-
move these. Replace any lost or
defective warnings symbols im-
mediately.
WARNING
Never operate the equipment in
a damaged condition.
Report any irregularities to your
superior immediately, especially
if they affect safety.