Filter
Top Products
Rebuilding the System
System Guide 29
7. From the Scene menu, choose Save As and save the Mixer file as DS Mixer.
Testing the Antex Hardware
Once you have installed the audio driver, you should run the Antex demo to
test the Antex hardware. You should also verify that the MIDI output is
enabled.
To run the Antex demo
1. From the Windows NT desktop, choose Start > Programs > Antex Demo
Programs.
2. Select Antex Demo from the list.
3. In the Antex Demo dialog box, click File.
4. In the WinNT\Media folder, select Windows NT logon sound.
5. In the Antex Demo dialog box, click Play.
The logon sound is played. If this test fails, verify your hardware
connections and then repeat the driver installation. If the problem
persists, contact your system reseller.
To verify that MIDI output is enabled
1. In the Windows NT Control Panel, double-click the Multimedia icon.
2. In the Multimedia Properties dialog box, select the MIDI panel.
3. Verify that Antex is displayed in the MIDI output list.
Install_ch1.book : Install_ch1.fm Page 29 Tuesday, December 16, 1997 5:57 PM