Filter
Top Products
The factory setting is shown in bold.
Programme Status Available settings
P1 S0
S 1 Factory default settings reinstated
P 2 Demonstration mode S 0 Off, the appliance will heat up
S 1 On, the appliance does not heat up
P 3 Audible tone volume S 1 Very quiet
S 2 Quiet
S 3 Medium
S 4 Loud
P 4 Water hardness
Hardness
setting
Hardness range mmol/l
S 1 Soft < 8.4 °dH < 1.5
S 2 Medium 8.4-14 °dH 1.5–2.5
S3 - - -
S 4 Hard > 14 °dH > 2.5
P 5 Temperature unit S1 °C
S2 °F
P 6 Pre-heat S 0 Pre-heating not active
S 1 Pre-heating active
P 7 Keypad tone S 0 Off
S1 On
Your local water supplier will be able to advise you on the water hardness for your
area.
Settings
71