Filter
Top Products
After installation and before using the
oven for the first time:
–
Set the clock.
–
Switch the catalyser on.
–
Clean the appliance.
–
Heat the oven up with nothing in it.
New appliances have a slight smell
on first use and this procedure will
dissipate the smells before you use
the oven to cook any food.
Setting the clock
When the appliance is first connected
to the power supply, or after a power
cut "12:00" and the symbols "f" and
")" flash in the display.
^
Press buttons "f" and ")" once at
the same time.
The following light up
–
"12:00" in the display,
– the "+/–" button indicator light.
^ While the indicator light between the
"+" and "–" buttons is still lit up, enter
the time of day in hours:minutes us-
ing the "+" or "–" buttons.
The display is set as standard for a
24 clock.
When the indicator light for the "+/–"
button goes out, the time of day has
been set and the display will change at
one-minute intervals. The colon flashes.
Before using for the first time
18