Filter
Top Products
Checking, altering times or
cancelling times entered
Times which have been entered for a
process can be called up at any time.
Press the relevant button for the time
you wish to check, alter or cancel.
If times are programmed for several
processes, (e.g. the oven and each
front cooking zone) each process can
be seen by pressing briefly more than
once on the relevant button.
For example press the relevant button
for the oven and both the front cook
-
ing zones:
– once and the time entered for the
oven appears.
– twice and the time entered for the
left cooking zone * appears.
– three times and the time entered for
the right cooking zone # appears.
To check
^
Press the button for the time to be
checked.
"f"
The start time of the cooking process
appears. This goes out as soon as the
process begins.
"g"
The display shows the duration of cook
-
ing time, or the time left if the
programme has started.
")" End of cooking time
To change
^
Press the relevant button.
^
As soon as the indicator light for the
"+/–" button goes out, you can
change the time.
If a button is pressed, where the time
was not entered, but calculated auto
-
matically by the system, the indicator
light in the centre of the "+/–" button
does not come on.
The time cannot be altered.
Cancelling the time
^ Press the "g" button.
^ Use the "–" button to set the time to
"0:00"
Cancelling a cooking time also cancels
the beginning and end of the cooking
time and vice versa.
Any programmed settings will also be
cancelled if you turn the function selec-
tor or hob control to "0".
If there is a power cut all programmes
entered will be deleted.
Using the clock / timer
39