Filter
Top Products
At the end of cooking time
–
the oven heating switches off auto
-
matically.
–
an audible tone sounds for approx.
5 seconds.
–
the ")" symbol flashes at the same
time.
^
Press the ) or turn the oven func
-
tion selector to "0".
The buzzer and the symbol are
switched off.
If the food is not cooked to your taste, a
new cooking time can be entered.
If the audible tone is not switched off it
will continue to sound at 5 minute inter-
vals as a reminder that cooking time
has finished. This reminder continues
for up to an hour.
Programming hob zone cooking
times
Please note it is not possible to use
this programme for hobs which have
the KSE 200 control unit.
If a time is entered for a front cooking
zone a symbol for that zone will appear
in the clock/timer display:
"*" for the front left cooking zone.
"#" for the front right cooking zone.
"t" for both front hob zones.
You cannot programme a cooking
time until you have selected a set-
ting for the zone.
Make sure the correct symbol is
showing in the display before pro-
gramming in times.
Enter the time using the "f", "g" or
")" buttons.
After entering the time the actual time of
day will reappear in the display.
The f, g or ) symbols will show in
the display if a time has been pro
-
grammed.
When a cooking process has been
pre-selected the symbol for the
pre-programmed zone will also flash,
and the hob control light will go out.
When the process starts running, the
symbol for the chosen hob zone lights
up.
Using the clock / timer
36