Filter
Top Products
To make cleaning easier you can
–
remove the oven door,
–
take out the telescopic carriage or
the runners,
–
take out the back panel
–
take out the side liners (if fitted)
–
lower the top heating element.
To remove the oven door
Please note : the oven door is heavy.
It should be gripped firmly at the
sides when being removed or re-fit
-
ted.
^ Open the door fully.
Before the door can be removed, the
door hinges need to be locked so
that they do not damage the door
when it is taken out.
^
Flip down the locking clamps on
each door hinge. This locks the
hinges.
^ Lift the door up until it is nearly in the
closed position. The hinges will auto-
matically swing out in this position,
then remove the door.
To re-fit the oven door
^ Hold the door as shown above and
carefully put the locked hinges into
the guide holes until they engage.
Open the door fully.
^
Still supporting the door, flip the lock
-
ing clamps up.
It is essential that the locking clamps
are flipped up when the door is
re-fitted after cleaning. Otherwise on
closing the door, the hinges could
work loose from the guide holes and
this could result in damage to the
door.
Cleaning and care
64