Filter
Top Products
To remove the catalytic enamelled
back panel, side liners (if fitted) and
roof liner
Make sure the oven heating ele
-
ments are switched off and cool.
Danger of burning.
The catalytic panels and liners can be
removed for cleaning if necessary.
See "Cleaning and Care" for more infor
-
mation.
– Back panel
^ Remove the runners.
^
Loosen the screws in the back panel
and take it out.
The oven must not be used without
the back panel fitted. This could
cause considerable injury.
Reassemble in the reverse order, care
-
fully ensuring all parts are correctly in
place.
– Roof liner
^
Remove the runners.
^
Lower the top heating element.
^
Hold the roof liner firmly and unscrew
the knurled knob.
^
Take out the roof liner.
Reassemble in the reverse order, care-
fully ensuring all parts are correctly in
place.
– Side liners
(depending on model)
^ Take the runners or the telescopic
frame out of the oven.
^
Gently lift and pull out the catalytic
side liners.
Reassemble in the reverse order, care
-
fully ensuring all parts are correctly in
place.
Cleaning and care
67