Filter
Top Products
^
If "F6" appears the oven has auto
-
matically switched itself off during
use. This is a safety feature to protect
the oven if it has been operating for
an exceedingly long period. The
length of time depends on the oven
function selected.
The oven can be used again immedi
-
ately by simply turning the oven
function selector to "0" and then en
-
tering the process again.
–
If "F9" appears in the display, this
may mean that the maximum temper
-
ature of the appliance has been ex
-
ceeded.
The appliance automatically switches
itself off temporarily. As soon as the
temperature has fallen to an accept-
able level the fault message disap-
pears. The appliance switches itself
on again automatically.
If this fault message occurs repeat-
edly, please inform the Service dept.
Please quote the fault message.
–
If any other fault message appears
in the display, this will need a service
visit. Please quote the fault message.
. . . the timer display does not light up
when the oven is operating.
This is not a fault.
The display does not light up if the time
of day display has been switched off.
Press "f" and ")" at the same time.
"12:00" will appear in the display field.
. . . the time of day cannot be re-set
after a power cut.
This is not a fault.
Check whether the function selector is
still set to one of the functions. If it is,
turn it to the "0" position.
The time of day can now be set.
. . . the energy-save function is not
activated when cooking with the
roast probe or the timer.
This is not a fault.
Certain conditions must be fulfilled be
-
fore the system controlling the en-
ergy-save function comes into opera-
tion. Sometimes these do not occur.
. . . the residual time indicator is not
activated when cooking with the
roast probe.
This is not a fault.
Certain conditions must be fulfilled be-
fore the system controlling residual time
comes into operation. Sometimes these
do not occur.
Correcting minor faults
73