Microwave function _
The following power levels can be
selected:
80 W, 150 W, 300 W, 450 W, 600 W,
850 W and 1000 W.
^
Turn the function selector to
Microwave _.
The display will show a suggested
power level of 1000 W.
I000
W
W
V
^ Whilst triangle V is flashing, use the
V sensor to select a lower setting if
you wish.
After a short while or after touching the
OK sensor to confirm the entry the
following will appear in the display:
0:00
min
T
V
^
Whilst triangle V is flashing, use the
W sensor to enter the required
duration in minutes:seconds (e.g. 1
minute and 30 seconds).
After a short while or after touching the
OK sensor to confirm the entry the
following will appear in the display:
I:30
W m T
Start
V
^
Touch the OK sensor to start the
programme.
If no other symbol is selected, the
duration will be visible counting down in
the display.
At the end of the duration
– the T symbol will flash.
– the cooling fan will continue to run for
a while.
– a buzzer will sound, if it is switched
on (see "Settings - Audible tone").
Touch any sensor to cancel the
buzzer.
The time of day will then appear in the
display. The lighting will switch off.
Operation
35