Filter
Top Products
– Press " " again.
– Wait until the minutes, e.g. "
00
" start to
fl ash.
– Select with "
" or " " the desired
time in minutes.
– Press " " again.
– Wait until the ventilation symbol starts to
fl ash.
– Select the desired ventilation level with "
" or " ".
– Press " " to store the switching moment.
5. Program the next ventilation programme, if
required.
– Then perform steps 1 to 5 for the next venti
lation programme.
2.3.7 Setting Additional Functions via the
P Menus
Via several P menus of the CC Ease operating
unit you can:
• Read off the status of various ventilation
functions;
• Activate or deactivate time delays for various
ventilation functions;
• Set time delays for various ventilation func-
tions.
In the P menus the user may:
- only set the additional functions P1,
P2 and P9.
The remaining P menus P3 to P8 are re-
served for the installer.
Access to the P menus
Proceed as follows:
1. Press "
" and " " simultaneously.
2. Wait until "P menu" appears on the display.
3. Select the desired P menu with "
" or "
", e.g. "
2
".
4. Press " " to confi rm the P menu.
5. Select the desired P sub-menu with "
"
or "
", e.g. "
23
".
6. Press "
" to confi rm the P sub-menu.
Making settings in the P menus
The minimum and maximum values for
the available ventilation functions are
stored in the software.
7. Select a new value for the function with "
" or " ".
8. Press "
" to save the value.
9. Repeat steps 5 to 8 to
set several P sub-menus in turn in the same
P menu.
Or
Return to the P menu; press once on
"
" and possibly start again at step 3.
Or
Return to the main window
Press " " twice.
2
10 Instructions for the User